Orange County Marine Technicians
Yacht Rigging & Deck Systems
Running rigging, synthetic systems, winches, davits, and lifting gear — specified and installed to yacht standard. Mobile service to your slip from Orange County through Los Angeles County.
(949) 682-3821Request an EstimateSailboat Rigging
Standing rigging • Running rigging • Splicing • Rig tuning
Motor Yacht Services
Deck hardware • Tender & davit systems • Lifting rigging • Safety systems
Yacht Rigging Inspections
Condition assessments • Preventative maintenance • Inspection reports
Custom Rigging
Dyneema • Synthetic systems • Custom rope assemblies • Fabrication
Winch & Deck Hardware
Winch service • Installation • Blocks • Clutches • Hardware
Refit & Upgrades
Rigging replacement • System upgrades • Yacht refit projects
Running Rigging
Halyards, sheets, and control lines built for load, chafe, and clean handling. We spec the right construction for the job — polyester, performance blends, or HMPE / Dyneema — then splice, install, and tune so the system runs the way it should.
Halyards
- Main, jib, and spinnaker halyards
- Low-stretch performance cores
- Covered and uncovered Dyneema
- Reeving and mast-exit work
Sheets
- Jib, genoa, and main sheets
- Asymmetric and symmetric kite sheets
- Runner and control-line packages
- Soft shackles and strop conversions
Splicing
- Eye, brummel, and lock splices
- Tapered covers and bury splices
- Core-to-core and cover-to-core
- On-site and shop splicing
Dyneema
- HMPE running-rigging systems
- Lightweight high-load replacements
- Chafe sleeves and cover protection
- Custom diameters and lengths
Rig & Deck Service
Winches, furlers, and deck hardware that sit unused between seasons fail when you need them. We service, rebuild, and replace the gear that makes the boat work — clean installs, correct fasteners, and hardware that belongs on a yacht, not a hardware-store bin.
Winches
- Strip, clean, and rebuild
- Pawls, springs, and bearings
- Electric winch service
- New winch specification and install
Furler Service
- Headsail furler inspection
- Foil, swivel, and drum service
- Furling-line replacement
- In-boom and in-mast systems
Hardware
- Blocks, clutches, and organizers
- Tracks, cars, and travelers
- Padeyes and backing plates
- Custom hardware installation
Repairs
- Failed fittings and seized gear
- Chafe and load-path repairs
- Mast-base and deck-penetration work
- Refit-ready replacement packages
Dock, Anchor & Safety Lines
Lines that live in salt water need the right construction, splices, and chafe gear. We build dock lines, anchor rodes, snubbers, lifelines, and towing assemblies to the boat — not off a rack.
Mooring & Dock
- Dock lines
- Custom lengths and eyes
- Chafe protection
Ground Tackle
- Anchor lines and rodes
- Snubbers
- Bridle systems
Safety & Tow
- Life lines
- Towing lines
- Emergency recovery lines
Yacht Crane & Lifting Rigging
A high-end category for motoryachts and large sailing yachts. Crane wire, pendants, slings, and load-path inspection — specified, built, and replaced as a system, not a collection of leftover shackles.
Crane Systems
- Crane wire and rope replacement
- Pendant replacement
- Custom lifting assemblies
Lifting Gear
- Lifting slings
- Shackles and hardware
- Lifting harnesses
Inspection
- Load-path inspection
- Wear, corrosion, and pinch points
- Service intervals and reports
Tender & Dinghy Systems
Davits, cranes, and tender rigging that launch cleanly and put the boat away without drama. We inspect the structure, replace tired wire and pendants, and build bridles and lifting harnesses that match the tender and the yacht.
Lifting
- Tender lifting systems
- Davit inspection and service
- Lifting harnesses
Connections
- Bridle systems
- Chafe protection
- Custom tender rigging
Hardware
- Davit and tender hardware
- Pads, fittings, and attachments
- Upgrade and refit packages
Yacht Deck Hardware & Systems
Deck hardware is the interface between the boat and every line on it. We install and replace cleats, fairleads, chocks, padeyes, rails, and custom fittings with correct backing, bedding, and load path.
Mooring Hardware
- Cleats and fairleads
- Chocks and hawse fittings
Attachment Points
- Padeyes and lifting points
- Rails and stanchions
Custom Work
- Custom deck hardware installation
- Backing plates and reinforcement
Synthetic Rigging & Technical Rope
HMPE and technical rope systems that look and perform like yacht work — not a traditional rope shop. Custom splicing, tensioned systems, and soft attachments built for the load and the finish the boat deserves.
HMPE / Dyneema
- HMPE / Dyneema systems
- Synthetic lifelines
- Lightweight standing-rigging options
Technical Build
- Custom splicing
- Tensioned systems
- Lashings and soft attachments
Assemblies
- Custom rope assemblies
- Soft shackles and strops
- Fabricated slings and pendants
Inspections, Mast Work & Refit
Most rigging failures are visible if someone who knows the system looks. We inspect standing and running rigging, service winches aloft and on deck, and plan replacement so a refit is a project — not a surprise.
Rig Inspections
- Condition assessments
- Preventative maintenance
- Written inspection reports
Mast & Tune
- Mast work
- Rig tuning
- Hardware installation
Refit Projects
- Full running-rigging replacement
- System upgrades
- Coordinated yacht refit work
Ready to spec the rigging?
Tell us the boat, the marina, and what is tired, stretched, or due for replacement. We will come to the vessel, assess the system, and quote the work cleanly.
(949) 682-3821Contact Us